Intermediate models

GH-110

Machine parameters

  • Lifting speed (with load): 2 m/min.
  • Lifting speed (without load): 5 m/min.
  • Transfer speed: 0-30 m/min.
  • Maximum gradient with load: 2%.
  • Diesel engine: 140 / 1800 rpm.
  • Length of slings/quantity: 12 mt. / 8 n.º
  • Ground pressure: 11.5 kg/cm².
  • Recommended boat (length / width): 30 / 7,4 máx. m.

Intermediate models

GH-165

Machine parameters

  • Lifting capacity: 150 tonnes.
  • Lifting speed (with load): 1.7 m/min.
  • Lifting speed (without load): 4.25 m/min.
  • Transfer speed: 0-30 m/min.
  • Maximum gradient with load: 2%.
  • Diesel engine: 160 / 1800 rpm.
  • Length of slings/quantity: 14 mt. / 8 n.º
  • Ground pressure: 11 kg/cm².
  • Recommended boat (length / width): 37 / 7,9 máx. m.

Intermediate models

GH-220

Machine parameters

  • Lifting capacity: 200 tonnes.
  • Lifting speed (with load): 1.2 m/min.
  • Lifting speed (without load): 3 m/min.
  • Transfer speed: 0-30 m/min.
  • Maximum gradient with load: 2%.
  • Diesel engine: 190 / 1800 rpm.
  • Length of slings/quantity: 14 mt. / 8 n.º
  • Ground pressure: 8 kg/cm².
  • Recommended boat (length / width): 40 / 8,5 máx. m.

Intermediate models

GH-275

Machine parameters

  • Lifting capacity: 250 tonnes.
  • Lifting speed (with load): 1 m/min.
  • Lifting speed (without load): 2.5 m/min.
  • Transfer speed: 0-25 m/min.
  • Maximum gradient with load: 2%.
  • Diesel engine: 250 / 1800 rpm.
  • Length of slings/quantity: 16 mt. / 16 n.º
  • Ground pressure: 9 kg/cm².
  • Recommended boat (length / width): 48 / 8,5 máx. m.

Features

ARTICULATED JOINT STRUCTURE

ARTICULATED JOINT STRUCTURE

Available with articulation to absorb torsional moments, thus properly settling and facilitating proper wheel movement on irregular surfaces.

AUTOMATIC STEERING ALIGNMENT

AUTOMATIC STEERING ALIGNMENT

HYDRAULIC DISTRIBUTION SYSTEM FOR MANOEUVRING

HYDRAULIC DISTRIBUTION SYSTEM FOR MANOEUVRING

GEARED DRIVE ENGINES

GEARED DRIVE ENGINES

Geared drive engines with compact wheels. Two or four, and even eight are mounted for lifted load capacity solutions depending on the slope and speed required.

HYDRAULIC DISTRIBUTORS WITH SAFETY VALVES

HYDRAULIC DISTRIBUTORS WITH SAFETY VALVES

SWINGS WITH CENTRAL MOORING TO HANG THE SLING

SWINGS WITH CENTRAL MOORING TO HANG THE SLING

PAINT

PAINT

Blast-cleaned until reaching SA level 2 ½. Painting consists of: 1 coat of two-pack epoxy primer; 1 two-pack epoxy middle coat, and 1 polyurethane enamel finish with a minimum thickness of 180 microns.

STEERING MODES

STEERING MODES

Cylinder or turntable and PLC steering according to the needs of the required steering modes.

SOUNDPROOFED PROPULSION UNIT

SOUNDPROOFED PROPULSION UNIT

Suitable for obtaining a 94 dB(A) LWA (sound power level) equal to an average sound pressure level of 66 dB(A) at 10 m, in accordance with Directive 2000/15/EC. Foreseen for outdoor operations.

EASY-TO-DISASSEMBLE BOLTED STRUCTURE

EASY-TO-DISASSEMBLE BOLTED STRUCTURE

In order to eliminate the risk of corrosion between the components comprising the bolted joints, they will be finished with waterproof seals when on-site assembly is carried out.

SUPER CUSHION WHEELS (SOLID) AND SAFEGUARDS

SUPER CUSHION WHEELS (SOLID) AND SAFEGUARDS

No punctures, no blow-outs.

STAINLESS STEEL HYDRAULIC PIPE

STAINLESS STEEL HYDRAULIC PIPE

Stainless steel precision pipe, in accordance with the DIN-3291 standard.

CERTIFICADO ISO 9001

CERTIFICADO ISO 9001

REMOTE CONTROL

REMOTE CONTROL

Remote control with a dual band 2.4GHz and 5GHz WiFi receiver so that the best choice can be made for each machine's place of installation. High speed and low interference.

COLOR SCREEN

COLOR SCREEN

Color screen displaying weight information from each lift and total or partial sum, safe operating period (SOP), and steering modes.

GEARED LIFTING ENGINES

GEARED LIFTING ENGINES

A geared lifting engine featuring fairings and positioned within the drum itself to provide a much more compact look, with two lifting speeds for greater no-load efficiency.

ERGONOMIC CABINS

ERGONOMIC CABINS

Cutting-edge, ergonomic cabin design.

Displacement types

Four types of rotation:

  • STD
    Movement with the 2 front wheels using pistons.
  • STD + 90 mechanical
    Lateral movement using pistons.
  • STD + mechanical polar
    The unit rotates 360º on its own axis using pistons.
  • Electronic Rotation (Using slewing bearings and a PLC)
    • 0º: STD: Movement with the 2 front wheels
    • 90º: Lateral movement + steering with the right-side wheels.
    • Polar: The unit rotates 360º on its own axis
    • +- 45º: + Movement in both diagonal directions.
    • Inverted: Movement using the 2 back wheels.

Any question?

Contact with us

Create a simulation Would you like to know how we can maximise your business? Try our simulator.